Adding A Pseudo Event On The Flapping Policy - Brocade Communications Systems StoreFabric SN6500B User Manual

32
Pseudo events
8. Click Next to advance to the Policy pane of the Add Event Action dialog box.
9. Define the frequency of the event's occurrence that would trigger the action.
10. Click Next to advance to the Action Group-Actions pane of the Add Event Action dialog box.
11. Select Apply as a Logging Policy to indicate whether or not you want the event occurrence to be
12. Click Next to advance to the Summary pane.
13. Click Finish.
For more information about adding an event action, refer to

Adding a pseudo event on the flapping policy

The flapping policy checks to see if the event consistently transitions between two opposite states
during a specified length of time. If it does, then the specified action in the definition is performed.
The following two-part procedure uses both the Add Pseudo Events dialog box and the Add Event
Actions dialog box to create an event action with the flapping policy.
1. Select Monitor > Event Processing > Pseudo Events.
2. Click Add.
3. Enter a name for the pseudo event, and click the Enabled check box to enable the event.
4. Click Next.
5. Click the Flapping button, and then enter the duration of time the Event Processor will wait
6. Click Next.
7.
8. Select a remediation event, such as LinkUp, and click the right arrow button to move it to the
1018
The Policy pane of the Add Event Action dialog box displays.
•
Click the Take actions for the selected event when they occur button if you want to take
action for the selected events when they occur.
•
Click the Take actions for the selected events based on below criteria button if you want to
take action for the selected events based on specified criteria.
The Action Group-Actions pane of the Add Event Action dialog box displays.
logged in the Management application database:
•
Select Log to log the occurrence in the Management application database.
•
Select Drop to not log the occurrence in the Management application database.
The Pseudo Events dialog box displays.
The Identification pane of the Add Pseudo Event dialog box displays.
The Policy pane of the Add Pseudo Event dialog box displays.
before generating the pseudo event. Specify the number of flapping times in minutes or
seconds.
The Events pane of the Add Pseudo Event dialog box displays.
Select a critical event, such as LinkDown, and click the right arrow button to move it to the
Selected Down Trap list.
Selected Up Trap list.
"Event action definitions"
Brocade Network Advisor SAN User Manual
on page 996.
53-1002696-01