24
Adding thresholds
4. Enter a name for the threshold in the Name field.
5. Select one of the following options:
6. Enter the number of C3 discarded frames allowed for the threshold in the Threshold errors
7.
8. Click OK to add the C3 discarded frames threshold to the table and close the Add C3 Discard
9. Click OK on the Port Fencing dialog box.
814
FIGURE 367
Add C3 Discard Frames Threshold dialog box
•
Default — Uses device defaults. Go to
•
Custom — Uses your selections. Continue with
field.
Select the time period for the threshold from the errors per list. The following choices are
available:
•
None — the port is blocked as soon as the specified number of C3 discarded frames
allowed is met.
•
Second — the port is blocked as soon as the specified number of C3 discarded frames
allowed is reached within a second.
•
Minute — the port is blocked as soon as the specified number of C3 discarded frames
allowed is reached within a minute.
•
Hour — the port is blocked as soon as the specified number of C3 discarded frames
allowed is reached within a hour.
•
Day — the port is blocked as soon as the specified number of C3 discarded frames allowed
is reached within a day.
Frames Threshold dialog box.
To assign this threshold to fabrics, switches, or switch ports, refer to
page 821.
step
8.
step
6.
Brocade Network Advisor SAN User Manual
"Assigning thresholds"
on
53-1002696-01