Enabling A Traffic Isolation Zone; Disabling A Traffic Isolation Zone - Brocade Communications Systems StoreFabric SN6500B User Manual

21
Traffic Isolation zones
8. Click the right arrow between the Potential Members list and the Zones list to add the selected
9. Click OK or Apply to save your changes.

Enabling a Traffic Isolation zone

NOTE
Traffic Isolation zones are configurable only on a Fabric OS device.
Use this procedure to enable a Traffic Isolation zone. When a zone configuration in the same zone
database is activated, the enabled TI zones are also activated at that time. Traffic Isolation zones
are enabled by default when you create them.
1. Select Configure > Zoning > Fabric.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select a fabric from the Zoning Scope list.
4. Right-click the Traffic Isolation zone you want to enable in the Zones list and select Configured
5. Click OK or Apply to save your changes.

Disabling a Traffic Isolation zone

NOTE
Traffic Isolation zones are configurable only on a Fabric OS device.
Traffic Isolation zones are enabled by default when you create them. Use this procedure to disable
a Traffic Isolation zone. To apply the settings and deactivate the zone, you must activate a zone
configuration in the same zone database.
1. Select Configure > Zoning > Fabric.
2. Click the Zone DB tab if that tab is not automatically displayed.
3. Select a fabric from the Zoning Scope list.
4. Right-click the Traffic Isolation zone you want to disable in the Zones list and clear the
746
ports to the zone.
The TI zone is saved, but is not activated. Traffic Isolation zones are activated when you
activate a zone configuration in the same zone database.
The Zoning dialog box displays.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
Enabled.
The Traffic Isolation zone is saved, but not activated. The Traffic Isolation zone is activated
when you activate a zone configuration in the same zone database.
The Zoning dialog box displays.
This identifies the target entity for all subsequent zoning actions and displays the zoning
database for the selected entity.
Configured Enabled check box.
Brocade Network Advisor SAN User Manual
53-1002696-01