Editing An E-Mail Call Home Center - Brocade Communications Systems StoreFabric SN6500B User Manual

7
Editing a Call Home center
8. Enter how often you want to retry the heartbeat interval in the Retry Interval field.
9. Enter the maximum number of retries in the Maximum Retries field.
10. Enter the primary phone number or extension of the Call Home center in the Call Home Center
11. Enter the backup phone number or extension of the Call Home center in the Call Home Center
12. Enter the phone number or extension of the local server in the Local Server - Phone Number
13. Enter the identification number of the local server in the Local Server - Server ID field.
14. Click Send Test to test the phone number.
15. Click OK to close the "Test Event Sent" message.
16. Click OK.
17. Click OK to close the Call Home dialog box.

Editing an e-mail Call Home center

E-mail Call Home centers are available for Brocade, IBM, NetApp, and Oracle. To edit one of these
Call Home centers, complete the following steps.
1. Select Monitor > Event Notification > Call Home.
2. Select the Call Home center you want to edit (Brocade E-mail, IBM E-mail, NetApp E-mail, or
3. Click Edit Centers (beneath the Call Home Centers table).
174
The default is 10 seconds.
The default is 3.
- Primary Connection field.
- Backup Connection field.
field.
The selected Call Home center must be enabled to test the phone number.
A faked event is generated and sent to the selected Call Home center. You must contact the
Call Home center to verify that the event was received and in the correct format.
The Call Home dialog box displays with the Call Home center you edited highlighted in the Call
Home Centers list.
The Call Home dialog box displays.
Oracle E-mail) in the Call Home Centers table.
The Configure Call Home Center dialog box displays (Figure 53).
Brocade Network Advisor SAN User Manual
53-1002696-01