Removing An Hba From A Host; Exporting Host Port Mapping - Brocade Communications Systems StoreFabric SN6500B User Manual

13

Removing an HBA from a Host

Removing an HBA from a Host

To remove an HBA from a Host, complete the following steps.
1. Right-click an HBA icon in the Fabric topology and select Host Port Mapping.
2. Select the HBA from the Hosts table on the right and click the left arrow.
3. Click OK to save your changes and close the Host Port Mapping dialog box.

Exporting Host port mapping

The Host Port Mapping dialog box enables you to export a Host port. The export file uses the CSV
format. The first row contains the headers (HBA/Ports WWN, Host Name) and the switch to which
the port is connected.
Example
To export a Host port, complete the following steps.
1. Open the Host Port Mapping dialog box by performing one of the following actions:
2. Select the Host port you want to export from the HBA/Ports list.
3. Click Export.
392
The Host Port Mapping dialog box displays.
The HBA you selected is removed from the Hosts table and the HBA is no longer associated
with the Host.
NOTE
If the HBA is part of more than one fabric, port nodes associated with the other fabrics will
automatically be moved to the Host.
If the HBA is part of more than one fabric, a message displays: The selected
Host_Name/Host_WWN is part of more than one fabric. The port nodes associated with the
other fabrics will automatically be removed from the Host. Click OK to close the message.
On the Connectivity Map, the HBA displays on its own.
HBA World Wide Name, Host Name
5005076717011E7D, Server1
50050767170A5AAF, Server1
-
Select an HBA port icon in the Fabric topology , then select Discover > Host Port Mapping.
-
Right-click any HBA port icon in the Fabric topology and select Host Port Mapping.
-
Right-click any HBA port in the Device Tree on the SAN tab and select Host Port Mapping.
The Host Port Mapping dialog box displays.
To configure Host port mapping, refer to
an HBA with a Host" on page 390.
The Export dialog box displays.
"Creating a new Host" on page 388 and
Brocade Network Advisor SAN User Manual
"Associating
53-1002696-01