Importing Hosts From A Fabric - Brocade Communications Systems StoreFabric SN6500B User Manual

4
Host discovery
6. Click Open.
7.
8. Configure Host credentials by choosing one of the following options:
9. Configure discovery authentication by choosing one of the following options:
10. Enter the port number in the Port field.
11. Enter your username in the User ID field.
12. Enter your password Password field.
13. Click OK on the Add Host Adapters dialog box.
14. Click Close on the Discover Host Adapters dialog box.

Importing Hosts from a Fabric

To discover a Host from a discovered fabric, complete the following steps.
1. Select Discover > Host Adapters.
2. Click Add.
62
The CSV file must meet the following requirements:
•
Comma separated IP address or host names
•
No commas within the values
•
No escaping supported
For example, XX.XX.XXX.XXX, XX.XX.X.XXX, computername.company.com
The CSV file is imported to the Add Host Adapters dialog box. During import, duplicate values
are automatically dropped. When import is complete, the imported values display in the Host
List. If the file cannot be imported, an error displays.
Verify the imported values in the Host List.
•
To configure HCM agent credentials, select the HCM agent option. Go to
•
To configure CIM server credentials, select the CIM server (ESXi only) option. Continue
with step .
If you do not need to configure Host credentials, skip to
•
To configure discovery with authentication, select the HTTPS from the Protocol list.
•
To configure discovery without authentication, select the HTTP from the Protocol list.
HCM agent default is 34568. CIM server HTTPS default is 5989. CIM server HTTP default is
5988.
HCM agent default is admin. Leave this field blank for the CIM server.
HCM agent default is password. Leave this field blank for the CIM server.
If an error occurs, a message displays. Click OK to close the error message and fix the problem.
A Host Group displays in Discovered Hosts table with pending status. To update the status from
pending you must close and reopen the Discover Host Adapters dialog box.
The Discover Host Adapters dialog box displays.
The Add Host Adapters dialog box displays.
step
step 13.
Brocade Network Advisor SAN User Manual
53-1002696-01
10.