4. Enter the memory allocation (MB) for the client in the Client Memory Allocation field.
5. Enter the memory allocation (MB) for the server in the Server Memory Allocation field.
Brocade Network Advisor SAN User Manual
53-1002696-01
If you enter an invalid value, an error message displays with the minimum value allowed. Click
OK and edit the value again.
The current configured number of megabytes for client memory allocation displays in the
Current Value field. The default minimum number of megabytes for client memory allocation
displays in the Default Minimum field.
Minimum values for SAN only are as follows:
•
Professional: 384 MB
•
Professional Plus: 512 MB
•
Enterprise Small: 512 MB
•
Enterprise Medium: 512 MB
•
Enterprise Large: 768 MB
NOTE
There is no restriction on the Client Heap Size value. The correct Client Heap Size value should
be given according to the RAM present in the server where it is launched.
NOTE
For a 32-bit server, configuring a value higher than 1024 MB impacts the client launch.
Client Heap Size (for both 32 and 64-bit servers)
•
Small : 512 MB
•
Medium : 512 MB
•
Large : 768 MB
If you enter an invalid value, an error message displays with the minimum value allowed. Click
OK and edit the value again.
The current configured number of megabytes for server memory allocation displays in the
Current Value field. The default minimum number of megabytes for server memory allocation
displays in the Default Minimum field. The IP address of the server displays in the Server IP
field. The server name displays in the Server Name field.
To support more than 8 clients on a 64-bit server, increase the memory allocation for the
server to 3076 MB.
Minimum values are as follows:
For a 32-bit Windows or Linux Server
•
Professional: 768 MB
•
Professional Plus: 768 MB
•
Enterprise Small : 768 MB
•
Enterprise Medium : 950 MB
•
Enterprise Large : 950 MB
For a 64-bit Windows or Linux Server
•
Professional: 1024 MB
•
Professional Plus: 1024 MB
•
Enterprise Small : 1024 MB
Software Configuration
5
119