Ethernet Jumbo Frames; Fcoe Protocols Supported; Ethernet Link Layer Protocols Supported; Fcoe Protocols - Brocade Communications Systems StoreFabric SN6500B User Manual

Ethernet jumbo frames

The basic assumption underlying FCoE is that TCP/IP is not required in a local data center network
and the necessary functions can be provided with Enhanced Ethernet. The purpose of an
"enhanced" Ethernet is to provide reliable, lossless transport for the encapsulated Fibre Channel
traffic. Enhanced Ethernet provides support for jumbo Ethernet frames and in-order frame delivery.
The Fabric OS FCoE 10 Gbps converged network adapter supports jumbo packets of up to 9 KB,
compared to the original 1,518-byte maximum transmission unit (MTU) for Ethernet. The frame size
increase allows the same amount of data to be transferred with less effort.

FCoE protocols supported

The Fabric OS FCoE converged network adapter supports two layers of protocols: Ethernet link layer
and FCoE layer.

Ethernet link layer protocols supported

The following protocols support the Ethernet link layer:
•
•
•
•
•
•
•
•
•
•
•
•
•

FCoE protocols

The following protocols support Fibre Channel over Ethernet:
•
•
•
•
•
Brocade Network Advisor SAN User Manual
53-1002696-01
802.1q (VLAN)
802.1Qaz (Enhanced Transmission Selection)
802.1Qbb (priority-based flow control)
802.3ad (link aggregation)
802.3ae (10 Gb Ethernet)
802.1p (priority encoding)
IEEE 1149.1 (JTAG) for manufacturing debug and diagnostics
IPv4 specification (RFC 793/768)
IPv6 specification (RFC 2460)
TCP/UDP specification (RFC 793/768)
ARP specification (RFC 826)
RSS with support for IPV4TCP, IPV4, IPV6TCP, IPV6 hash types
HDS (Header-data split)
FIP (FC-BB5 compliant):
-
Support for FIP Discovery protocol for dynamic FCF discovery and FCoE link management
-
Support for FPMA and SPMA type FIP fabric login
Support for Initiator mode only (FCP-3 compliant in Initiator mode)
SCSI protection information support
IP-over-FC
NPIV support

FCoE protocols supported

16
437