Registering Authentication Cards From The Database - Brocade Communications Systems Brocade 8/12c Administrator's Manual

2
Smart card usage
FIGURE 8
5. Insert a smart card into the card reader. Wait for the card serial number to appear, then enter
6. Click OK.
7.
8. Repeat step 5 through step 7 until you have successfully registered all cards. Ensure that the
For more information, see

Registering authentication cards from the database

Smart cards that are already in the Management program's database can be registered as
authentication cards.
1. Select Configure > Encryption from the menu task bar.
2. Select an encryption group from the Encryption Center Devices table, then select Security from
3. Click Register from Archive.
18
Add Authentication Card dialog box
card assignment information as directed.
Wait for the confirmation dialog box indicating initialization is done, then click OK.
The card is added to the Registered Authentication Cards table in the Encryption Group
Properties dialog box.
number of cards registered equals at least the quorum size plus one.
"Tracking smart cards"
The Encryption Center dialog box displays.
the menu task bar, or right-click an encryption group and select Security.
The Encryption Group Properties dialog box displays with the Security tab selected.
The Authentication Cards dialog box displays. The dialog box lists the smart cards that are in
the database.
The Authentication Cards dialog box displays. The dialog box lists the smart cards that are in
the database.
on page 22.
Fabric OS Encryption Administrator's Guide
53-1002159-03