Adding A Pseudo Event On The Resolving Policy; Creating An Event Action With A Pseudo Event On The Resolving Policy - Brocade Communications Systems StoreFabric SN6500B User Manual

Adding a pseudo event on the resolving policy

When a down event occurs, a resolving policy waits for a specified duration to see if the event
remains in that state by checking if an up event occurs. If an up event occurs, a resolving pseudo
event is generated by the Event Processor.
The following two-part procedure uses both the Add Pseudo Events dialog box and the Add Event
Actions dialog box to create an event action with the resolving policy.
1. Select Monitor > Event Processing > Pseudo Events.
2. Click Add.
3. Enter a name for the pseudo event, and click the Enabled check box to enable the event.
4. Click Next.
5. Click the Resolve button, and then enter the duration of time the Event Processor will wait
6. Click Next.
7.
8. Select a remediation event, such as LinkUp, and click the right arrow button to move it to the
9. Click Finish to complete the pseudo event configuration.

Creating an event action with a pseudo event on the resolving policy

1. Select Monitor > Event Processing > Event Actions.
2. Click Add to display the Identification pane of the Add Event Action dialog box.
3. Enter a name and description for the event action and click the Enabled check box to enable
4. Click Next to display the Events pane.
5. Select the Pseudo Events event type from the Show list.
6. Select the pseudo event you created and click Next.
7.
Brocade Network Advisor SAN User Manual
53-1002696-01
The Pseudo Events dialog box displays.
The Identification pane of the Add Pseudo Event dialog box displays.
The Policy pane of the Add Pseudo Event dialog box displays.
before generating the pseudo event. Specify the resolve time in minutes or seconds.
The Events pane of the Add Pseudo Event Events dialog box displays.
Select a critical event, such as LinkDown, and click the right arrow button to move it to the
Selected Down Trap list.
Selected Up Trap list.
Now, you must create a new event action definition using the Add Event Actions dialog box.
The Event Actions dialog box displays.
the event.
By default, the Events pane of the Add Event Action dialog box displays.
The available pseudo events display.
The Sources pane of the Add Event Action dialog box displays.
Select the source that you will use to monitor this event from the Selected Sources list.
32
Pseudo events
1017