29
Thresholds and event notification
14. Make the threshold changes by selecting one of the following options:
15. Click OK on the Confirm Threshold Changes dialog box.
Duplicating a threshold policy
To duplicate a threshold policy, complete the following steps.
1. Select Monitor > Fabric Watch > Performance Thresholds.
2. Select the threshold policy you want to copy in the Available Threshold Policies table.
3. Click Duplicate.
4. Click OK on the Set Threshold Policies dialog box.
5. Make the threshold changes by selecting one of the following options:
6. Click OK on the Confirm Threshold Changes dialog box.
Assigning a threshold policy
To assign a threshold policy to a fabric or device, complete the following steps.
1. Select Monitor > Fabric Watch > Performance Thresholds.
932
FIGURE 406
Confirm Threshold Changes dialog box
•
To only add new thresholds, select the Keep currently set thresholds and only add new
thresholds check box.
•
To overwrite all existing thresholds on all fabrics and devices, select the Overwrite all
thresholds currently set on all switches check box.
The Set Threshold Policies dialog box displays.
The threshold policy displays in the Available Threshold Policies table with an added icon (
using the following naming format copy of Threshold_Name. To edit the threshold, refer to
"Creating and editing a threshold policy"
or device, refer to
"Assigning a threshold policy"
The Confirm Threshold Changes dialog box displays.
•
To only add new thresholds, select the Keep currently set thresholds and only add new
thresholds check box.
•
To overwrite all existing thresholds on all fabrics and devices, select the Overwrite all
thresholds currently set on all switches check box.
The Set Threshold Policies dialog box displays.
on page 929. To assign a threshold policy to a fabric
on page 932.
Brocade Network Advisor SAN User Manual
)
53-1002696-01