To continue this tutorial, go to
to Parameters
Exercise 3: Matching Offsets and Dimensions to
Parameters
In this exercise, you will match the work plane offsets and diameter dimensions
to the parameters. The next step, though, is to create a few more structure
parameters.
For more information, see the AutoCAD Civil 3D Help topic Understanding
Part Builder.
This exercise continues from
(page 659).
1 Expand Model Parameters and Size Parameters.
Note that there are entries listed for the work plane offsets, structure
parameters and body diameter dimensions.
Exercise 3: Matching Offsets and Dimensions to Parameters | 669
Exercise 3: Matching Offsets and Dimensions
(page 669).
Exercise 2: Defining the Manhole Geometry