Autodesk CIVIL3D - CIVILDESIGNCOMP 2007 SLM CD Tutorials Manual page 774

Change the style of a single label
1 Click the curve label near station 0+040. Right-click. Click Properties.
2 In the Properties palette, change the Curve Label Style to Curve Label
Style
3 Press Esc to deselect the label.
Change the style of a group of labels
1 Click station label 0+040.
All station labels are highlighted, indicating that they are part of a label
group.
2 Right-click. Click Properties.
NOTE Selecting Edit Alignment Labels from the shortcut menu opens the
Alignment Labels dialog box, where you can change the alignment label set.
3 In the Properties palette, under Labeling, change the Major Station Label
Style to Perpendicular With Tick.
4 Press Esc.
Flip a label to the opposite side of the alignment
1 Ctrl+click geometry point label PC: 0+018.54.
2 In the Properties palette, examine the properties that are available. Under
General, change the Flipped property to True. Close the Properties palette.
3 Press Esc to deselect the labels.
762 | Chapter 19 Labels and Tables Tutorials
Design Data.