Exercise 4: Splitting A Profile View - Autodesk CIVIL3D - CIVILDESIGNCOMP 2007 SLM CD Tutorials Manual

NOTE Like other AutoCAD Civil 3D labels, label parameters are changed by
selecting the desired label, and then using the Labels contextual tab on the
ribbon.
2 In the Profile View Properties dialog box, on the Projections tab, clear
the
3 Click Apply.
The 3D polylines are removed from the profile view, and are cleared from
the Profile View Properties dialog box.
4 Click OK.
Further exploration: Examine the style settings that are available for projected
objects. Projected object styles are located in Toolspace, on the Settings tab,
in the General
styles for projected objects are located in Toolspace, on the Settings tab, in
the Profile View
To continue this tutorial, go to

Exercise 4: Splitting a Profile View

In this exercise, you will split a profile view so that the full elevation range of
a layout profile fits in a shorter profile view.
For more information, see the AutoCAD Civil 3D Help topic Working with
Profile Views.
This exercise continues from
(page 314).
Split a profile view
1 Open Profile-5D.dwg, which is located in the
819)
2 Click Home tab
drop-down
3 In the Create Profile View wizard, on the General page, specify the
following parameters:
Select Alignment: Ridge Road
3D Polylines check box.
Multipurpose Styles
Label Styles Projection collection.
Exercise 4: Splitting a Profile View
Exercise 3: Projecting Objects onto a Profile View
Profile & Section Views panel
Create Profile View.
Exercise 4: Splitting a Profile View | 321
Projection Styles collection. Label
tutorial drawings folder
Profile View
(page 321).
(page