Autodesk CIVIL3D - CIVILDESIGNCOMP 2007 SLM CD Tutorials Manual page 314

NOTE The warning symbols do not automatically scale when you zoom in.
Enter REGEN on the command line to resize the warning symbols.
3 Hover the cursor over the
The tooltips are a convenient way to review design criteria violations in
the drawing window. Two violations are displayed in the tooltip:
First, the curve does not meet the recommended minimum K value
for headlight sight distance. The curve K value and minimum
acceptable K value are both displayed.
Second, the curve does not meet the formula specified in one of the
design checks. Notice that the name of the design check is displayed,
but not the current or recommended values. Values are not displayed
because design checks are custom formulas that are created by the
user.
NOTE If a sub-entity violates multiple criteria or design checks, only a single
symbol is displayed on the sub-entity. To clear a symbol from a sub-entity,
all the violations must be cleared.
4 If the Profile Layout Tools toolbar is not open, select the red layout profile.
Right-click. Click Edit Profile Geometry.
5 On the Profile Layout Tools toolbar, click
6 Click
In the Profile Entities vista, in rows 2 and 4, notice that a
symbol appears in the No. column, as well as several other columns.
302 | Chapter 9 Profiles Tutorials
symbol in Circle C.
. Profile Grid View
Entity Based.
warning