Chapter 12 Corridor Assembly Tutorials; Tutorial: Working With Assemblies - Autodesk CIVIL3D - CIVILDESIGNCOMP 2007 SLM CD Tutorials Manual

Corridor Assembly
Tutorials
These tutorials will get you started working with the corridor assemblies, which create the
primary structure of AutoCAD Civil 3D corridor models.
The tutorials in this section demonstrate common tasks for working with corridor assemblies
for any application. You will learn how to build assemblies for specific types of corridors,
including divided highways and corridors with transition lanes, in the
(page 459).
If you have not installed AutoCAD Civil 3D to the default location, you may receive messages
in the Event Viewer indicating that subassembly macro paths are not found. To avoid these
messages, it is recommended that you follow the exercises in the order presented.
NOTE All drawings used in these tutorials are available in the
. If you want to save your work from these tutorials, save the drawings to the
819)
Tutorial Data folder (page 819)
For more information, see the AutoCAD Civil 3D Help topics Understanding Assemblies and
Understanding Subassemblies.

Tutorial: Working with Assemblies

This tutorial demonstrates the basic tasks you will use to use AutoCAD Civil 3D
subassemblies to build corridor assemblies.
This tutorial demonstrates common tasks that you can apply when working
with corridor assemblies for any application. In the
459), you will learn how to build assemblies for specific types of corridors,
including:
Assembly with a transition lane
so that you do not overwrite the original drawings.
(page 464)
12
Corridors Tutorials
tutorial drawings folder (page
My Civil
Corridors Tutorials (page
421