Autodesk CIVIL3D - CIVILDESIGNCOMP 2007 SLM CD Tutorials Manual page 301

3 In the Profile View Properties dialog box, on the Profiles tab, clear the
Draw check boxes for the right offset and left offset profiles.
The Profiles tab displays all existing profiles for a given horizontal
alignment, both surface profiles and layout profiles. You can use the Draw
check boxes to specify which profiles to display in the profile view.
Further exploration: You can permanently delete a profile by selecting
it in the drawing (or in Toolspace) and pressing the Delete key. If you
delete a profile, it is removed from all profile views, the list of profiles in
the Profile View Properties dialog box, and Toolspace. To restore a deleted
surface profile, create a new one. The new profile is displayed in any
applicable profile views, and can be edited in the Profile View Properties
dialog box.
To continue with this exercise, ensure that the centerline profile is visible
in profile view PV- (1).
4 Click OK.
Specify the profile creation settings
1 NOTE Turn off Object Snap (OSNAP). For more information, see Object
Snapping.
2 Click Home tab Create Design panel
Creation Tools.
3 Click the bottom grid to select profile view PV-1.
4 In the Create Profile – Draw New dialog box, change the Profile Style to
Finished Ground.
5 In the Profile Label Set list, select Standard. Click
Profile drop-down
Exercise 1: Creating a Layout Profile | 289
Profile
.