Autodesk CIVIL3D - CIVILDESIGNCOMP 2007 SLM CD Tutorials Manual page 210

8 In the New User dialog box, enter the following information:
First Name: Pat
Last Name: Red
User Name: pred
Password: red123
Confirm Password: red123
9 Select Enable User. Click OK.
10 Repeat steps 7 through 9 to create another user profile as follows:
First Name: Kim
Last Name: Green
User Name: kgreen
Password: green123
Confirm Password: green123
11 Close the User Management dialog box.
Create user groups
1 In the Global Settings dialog box, on the Security tab, click Groups.
2 In the Groups dialog box, click New Group.
3 In the Group dialog box, in the Group Name field, enter Engineers.
4 Click the Roles button, then select Administrator. Click OK.
5 Click the Vaults button, then select the database that your test users will
work in. Select the default value, which is Vault. Click OK.
6 Select Enable Group.
7 Click the Add button.
8 To add the member pred to the group, in the Add Members dialog box,
in the Available Members table, click the row for pred. Click Add.
9 Click OK to close the Add Members dialog box.
10 Click OK to close the Group dialog box.
198 | Chapter 7 Project Management Tutorials