Exercise 1: Creating A Divided Highway Assembly - Autodesk CIVIL3D - CIVILDESIGNCOMP 2007 SLM CD Tutorials Manual

Exercise 1: Creating a Divided Highway Assembly

In this exercise, you will create a fairly complex assembly with a depressed
median and separated lanes.
For more information, see the AutoCAD Civil 3D Help topic Creating Assemblies.
Create an assembly baseline
1 Open Corridor-3a.dwg, which is available in the
(page 819).
2 Click Home tab
Assembly
3 In the Create Assembly dialog box, for Name, enter Divided Highway.
Click OK.
4 When the 'Specify assembly baseline location' prompt is displayed on
the command line, click a point in the drawing to build the assembly.
The viewport zooms to the assembly baseline, which looks like this:
Add a median subassembly
1 If the Tool Palette containing the subassemblies is not visible, click Home
tab
2 In the tool palette, right-click the Tool Palettes control bar. Click Civil
Imperial Subassemblies.
3 Click the Medians tab.
4 Right-click
the diagram to better understand the subassembly.
472 | Chapter 13 Corridors Tutorials
Create Design panel
.
Palettes panel Tool Palettes
MedianDepressedShoulderExt. Click Help. Review
tutorial drawings folder
Assembly drop-down
.
Create