Autodesk CIVIL3D - CIVILDESIGNCOMP 2007 SLM CD Tutorials Manual page 155

NOTE All survey points must be reprocessed because any point potentially
can contribute to the definition of any generated figure.
8 Click Yes.
9 In the Process Linework dialog box, clear the Insert Survey Points check
box.
In this case, it is only necessary to update the figure linework. The point
coordinates did not change.
10 Click OK.
The linework is reprocessed, and the survey figure is corrected.
11 Click Save As.
12 Navigate to the My Civil Tutorial Data folder
enter Survey-3.dwg. Click Save.
To continue to the next tutorial, go to
144).
Viewing and Editing Survey Data
Exercise 2: Updating Imported Survey Data | 143
(page 819). For File Name,
(page