Tutorial: Calculating And Reporting Quantities - Autodesk CIVIL3D - CIVILDESIGNCOMP 2007 SLM CD Tutorials Manual

10 Repeat Steps 7 through 9 to change the Overhaul Area Hatch Pattern to
DASH.
NOTE A solid component fill provides the best performance. Drawing
regeneration may be slower if a hatch pattern is used on a long mass haul
diagram.
11 Click OK twice.
The patterns you selected are displayed in the free haul and overhaul
areas of the mass haul diagram. Notice that the mass haul diagram uses
the balance point method to measure free haul.
To continue to the next tutorial, go to
(page 603).

Tutorial: Calculating and Reporting Quantities

In this tutorial, you will learn how to create and manage pay item data,
associate pay item codes with several types of drawing objects, and generate
pay item quantity reports.
Calculating and Reporting Quantities
Tutorial: Calculating and Reporting Quantities | 603