Autodesk CIVIL3D - CIVILDESIGNCOMP 2007 SLM CD Tutorials Manual page 187

A icon appears at the end of the current line, and the command
line states that there is not enough data to define the segment. This
happened because the current segment is a lot line that is shared by all
the parcels on the left side of the site.
11 Select the bearing portion of the label. Enter R to reverse the direction.
12 Select the bearing over distance label to the right of the arrow.
The arrow returns to the point of beginning.
13 Press Enter to end the command.
In the Mapcheck Analysis dialog box, notice that you can edit any of the
sides you created during the mapcheck analysis.
14 Click Output View.
The Output View displays the results of the mapcheck analysis. You will
learn how to work with the output data in
Mapcheck Data (page 179).
To continue this tutorial, go to
by Manually Entering Data
Exercise 2: Performing a Mapcheck Analysis with Parcel Labels | 175
Exercise 4: Working with
Exercise 3: Performing a Mapcheck Analysis
(page 176).