Tutorial: Adding Data To A Section View; Exercise 1: Projecting An Object Onto A Section View - Autodesk CIVIL3D - CIVILDESIGNCOMP 2007 SLM CD Tutorials Manual

To continue to the next tutorial, go to
577).

Tutorial: Adding Data to a Section View

This tutorial demonstrates how to add annotative data to a section view.
For more information, see the AutoCAD Civil 3D Help topic Sections.

Exercise 1: Projecting an Object onto a Section View

In this exercise, you will project multi-view blocks and 3D polylines from plan
view onto section views.
A variety of AutoCAD and AutoCAD Civil 3D objects can be projected into a
section view. However, linear objects, such as 3D polylines and feature lines,
are represented as a marker that indicates the point location where the object
crosses the sample line in plan.
For more information, see the AutoCAD Civil 3D Help topic Adding Projected
Objects to a Section View.
Project objects onto multiple section views
1 Open Section-Project-Objects.dwg, which is located in the
folder
A proposed corridor and a series of section views are displayed in two
viewports in the drawing. Along the corridor, several other objects are
visible:
Red polylines on either side of the corridor represent the corridor
right-of-way.
A blue polyline along the right side of the corridor represents a fence.
AutoCAD blocks that represent utility poles are displayed along the
right side of the corridor.
Multi-view blocks that represent a line of trees are displayed along
the left side of the corridor.
2 Click Home tab
drop-down
3 In the top viewport, select one of the section views.
(page 819).
Profile & Section Views panel
Project Objects To Multiple Section Views.
Tutorial: Adding Data to a Section View | 577
Adding Data to a Section View
tutorial drawings
Section Views
(page