Autodesk CIVIL3D - CIVILDESIGNCOMP 2007 SLM CD Tutorials Manual page 630

Top_Curb: 60902-0800
9 Click OK.
Apply the new code set to the corridor and assembly
1 In the drawing, select the side road corridor. Right-click. Click Properties.
2 On the Properties palette, under Data, for Code Set Style Name, select
Corridor Quantities.
3 Press Esc.
4 In the drawing, select the baseline of the corridor assembly. Right-click.
Click Properties.
5 On the Properties palette, under Data, for Code Set Style Name, select
Corridor Quantities.
6 Press Esc.
7 Rebuild the corridor.
To continue this tutorial, go to
(page 619).
618 | Chapter 16 Material Calculation Tutorials
Exercise 5: Working with Quantity Reports