Autodesk CIVIL3D - CIVILDESIGNCOMP 2007 SLM CD Tutorials Manual page 758

For more information, see the AutoCAD Civil 3D Help topic Adding Labels to
Drawings.
Create a label set for a new alignment
NOTE This exercise uses Labels-1a.dwg with the modifications you made in the
previous exercise, or you can open Labels-2a.dwg from the
(page 819).
1 Click Home tab
Alignment From Objects
the Xref option.
2 Click the blue polyline on the west side of the site.
Polyline in the externally referenced drawing
3 Press Enter twice.
746 | Chapter 19 Labels and Tables Tutorials
Create Design panel Alignment drop-down
. On the command line, enter X to select
tutorial drawings folder
Create