Autodesk CIVIL3D - CIVILDESIGNCOMP 2007 SLM CD Tutorials Manual page 175

14 For Station 2, Backsight 1, specify the following parameters:
(point number): 3
Angle: 90
Distance: 100
NOTE After you enter the Distance value, you must click
Description: STA 3
15 For Station 3, Backsight 2, specify the following parameters:
(point number): 4
Angle: 90
Distance: 100
Description: STA 4
16 For Station 4, Backsight 3, specify the following parameters:
(point number): 1
Angle: 90
Distance: 100
17 Click to save the traverse information.
18 On the Survey tab, right-click Survey Network 3 and click Insert Into
Drawing.
The new survey data is displayed in the drawing.
Exercise 2: Creating Survey Data Using the Traverse Editor | 163
.