Exercise 2: Moving Labels In A Data Band - Autodesk CIVIL3D - CIVILDESIGNCOMP 2007 SLM CD Tutorials Manual

To continue this tutorial, go to
336).

Exercise 2: Moving Labels in a Data Band

In this exercise, you will learn how to rearrange labels in data bands.
Data band labels may overlap one another if the points they label are close
together. In this exercise, you will learn how to stagger a series of labels in a
data band, and then move individual data band labels to specific locations.
For more information, see the AutoCAD Civil 3D Help topic Profile Labels and
Label Styles.
This exercise continues from
(page 331).
Stagger data band labels
1 Open Profile-6B.dwg, which is located in the
819).
The data bands at the bottom of profile view PV - (3) annotate the
horizontal and vertical geometry of the proposed road alignment, and
the elevation of each profile at the major stations.
2 Zoom in to the following area.
336 | Chapter 9 Profiles Tutorials
Exercise 2: Moving Labels in a Data Band
Exercise 1: Adding Data Bands to a Profile View
tutorial drawings folder
(page
(page