Autodesk CIVIL3D - CIVILDESIGNCOMP 2007 SLM CD Tutorials Manual page 57

Create a point query
1 Open Points-4e.dwg, which is located in the
819).
2 In Toolspace, on the Prospector tab, right-click Point Groups. Click New.
3 In the Point Group Properties dialog box, on the Information tab, for
Name, enter Storm Manholes - Invert In.
4 On the Query Builder tab, select Modify Query.
5 Right-click the Query Builder table. Click Insert Row.
6 Click the row you created. Click Name in the Property column. In the
Property list, select MH_Pipe In Invert.
7 Click the Operator value. In the Operator list, select < (less than).
8 Click the Value value. Enter 93.
9 Click OK.
10 On the Prospector tab, click Storm Manholes - Invert In.
A list of points that match your query is displayed in the item view. Points
number 307 and 667 are excluded, because in a previous exercise you set
their values for MH_Pipe In Invert to 93.05 and 93.00.
Exercise 5: Querying User-Defined Property Information | 45
tutorial drawings folder (page