Exercise 3: Selecting And Moving Labels - Autodesk CIVIL3D - CIVILDESIGNCOMP 2007 SLM CD Tutorials Manual

Alignment with manually inserted segment labels
To continue this tutorial, go to

Exercise 3: Selecting and Moving Labels

(page
755).
Exercise 3: Selecting and Moving Labels
In this exercise, you will select labels and change their location in the drawing.
Your drawing currently contains many labels, some of which overlap one
another. You will move them in the following steps.
Some label types, such as alignment station and geometry point labels, are
part of a label type group that shares properties. When you click one label in
the group, the entire group is selected. Properties for the group are controlled
using the AutoCAD Properties palette, which is available when you select the
group, right-click, and click Label Properties. You can select the group and
then change the properties of all labels in the group simultaneously.
Alternatively, you can use Ctrl+click to select and change label properties
individually.
Exercise 3: Selecting and Moving Labels | 755