Autodesk CIVIL3D - CIVILDESIGNCOMP 2007 SLM CD Tutorials Manual page 246

Create offsets of a centerline alignment
1 Open Align-6A.dwg, which is located in the
819).
The drawing contains a surface and an alignment.
2 Click Home tab
Offset Alignment
3 Select the alignment in the drawing.
4 In the Create Offset Alignments dialog box, specify the following
parameters:
No. Of Offsets On Left: 1
234 | Chapter 8 Alignments Tutorials
Create Design panel Alignment drop-down
.
tutorial drawings folder (page
Create