Autodesk CIVIL3D - CIVILDESIGNCOMP 2007 SLM CD Tutorials Manual page 252

For more information, see the AutoCAD Civil 3D Help topic Widenings.
This exercise continues from
236).
Create a widening on an offset alignment
1 Open Align-6C.dwg, which is located in the
819).
The drawing contains a surface and a centerline alignment with two offset
alignments.
2 Select the offset alignment on the right-hand side of the centerline
alignment.
240 | Chapter 8 Alignments Tutorials
Exercise 2: Editing an Offset Alignment
tutorial drawings folder
(page
(page