Autodesk CIVIL3D - CIVILDESIGNCOMP 2007 SLM CD Tutorials Manual page 798

7 Press Esc to deselect the labels.
8 On the command line, enter REGEN.
Notice that while the ticks still inherit the red color from the
C-ROAD-TEXT layer, the text is blue.
Label style that uses color that differs from referenced layer
Add another label
1 Click Annotate tab
menu
2 When prompted to select a segment to label, click the alignment between
stations 0+060 and 0+080. When a label appears on the alignment, press
Enter to end the command.
786 | Chapter 19 Labels and Tables Tutorials
Labels & Tables panel
Alignment Single Segment
Add Labels
.