Autodesk CIVIL3D - CIVILDESIGNCOMP 2007 SLM CD Tutorials Manual page 622

Assign multiple pay item codes to a closed area
1 In the QTO Manager vista, click
2 In the
62401-0400
62511-2000
62525-0000
TIP To select multiple items, hold the Ctrl key down and then click the items.
3 Press Enter.
4 On the command line, enter O.
This action activates object selection mode, in which you select the outline
of a closed object, as opposed to a point inside the object. Because some
of the parking lot islands are subdivided by pipes, you can use object
selection mode to assign the pay item codes to the entire object, not only
to the closed area that you select.
TIP For faster performance, zoom in to a closed polygon before you select
it.
610 | Chapter 16 Material Calculation Tutorials
Favorites category, select the following pay items:
.