Exercise 7: Creating A Pay Item List - Autodesk CIVIL3D - CIVILDESIGNCOMP 2007 SLM CD Tutorials Manual

7 Click Close twice.
Load a different formula file
1 Click Analyze tab
2 In the QTO Manager vista, click Open
Use the Open dialog box to navigate to an existing pay item formula file.
You can have several formula files available, and switch between them
as needed.
3 Click Cancel.
To continue this tutorial, go to

Exercise 7: Creating a Pay Item List

In this exercise, you will add content to a sample pay item list, update the
categorization file, and then examine the results.
You can use this workflow to create custom pay item lists and categorization
files from existing data.
This exercise continues from
(page 622).
Create a new pay item list
1 Open Quantities-7.dwg, which is located in the
(page 819).
This drawing contains a commercial site, which consists of a building
footprint, a parking lot, and access roads.
2 Click Analyze tab
3 In Windows Explorer, navigate to the
folder
4 Select Getting Started.csv. Right-click. Click Open With
Excel.
The pay item list opens in Microsoft Excel. Notice that the Pay Item, Item
Description, and Unit_E columns correspond to the Pay Item ID,
Description, and Unit Type columns in the QTO Manager vista. You can
QTO panel
Exercise 7: Creating a Pay Item List
Exercise 6: Working with Pay Item Formulas
QTO panel
(page 819).
Exercise 7: Creating a Pay Item List | 625
QTO Manager.
Formula File.
tutorial drawings folder
QTO Manager.
Data\Pay Item Data\Getting Started
Microsoft Office
(page 625).