Tutorial: Working With Tables And Tags - Autodesk CIVIL3D - CIVILDESIGNCOMP 2007 SLM CD Tutorials Manual

Geometry point labels with abbreviations modified in drawing
settings
6 Close the drawing.
To continue to the next tutorial, go to Working with Tables and Tags (page
767).

Tutorial: Working with Tables and Tags

This tutorial demonstrates how to place object data into tables.
Each row in a table contains information about a single object component,
such as a line or a curve. You can create tables for point, parcel, alignment,
surface, pipe, and structure objects. However, only alignment and parcel tables
can be created through Xref.
Some object label styles have two modes: label and tag. Label mode is the
default label appearance when you annotate an object. Tag mode replaces the
detailed label information with a short alphanumeric code so you can move
the information into a table. Labels switch to tag mode automatically when
a table is inserted into the drawing, using the style-based selection method.
Tutorial: Working with Tables and Tags | 767