Ipv6 Pim Spt-Threshold - Dell Z9500 Reference Manual

Version
9.5(0.1)
8.3.19.0
8.3.12.0
7.4.1.0
Usage Enable the interface (use the no shutdown command) and not have the
Information switchport command configured. Also enable Multicast globally. PIM is
supported on the port-channel interface.

ipv6 pim spt-threshold

Specifies when a PIM leaf router should join the shortest path tree.
Z9500
Syntax
ipv6 pim spt-threshold {kbps | infinity}
To return to the default value, use the no ipv6 pim spt-threshold command.
Parameters
kbps
infinity
Defaults 10 kbps
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.5(0.1)
8.3.19.0
8.3.12.0
7.4.1.0
Usage PIM leaf routers join the shortest path tree immediately after the first packet arrives
Information from a new source.
1374
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the S4810.
Introduced
Enter a traffic rate in kilobytes per second. The range is from
0 to 4294967 kbps. The default is 10 kbps.
Enter the keyword infinity to have all sources for the
specified group use the shared tree and never join shortest
path tree (SPT).
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the S4810.
Introduced
PIM-Sparse Mode (PIM-SM)