Dell PowerConnect M6348 Cli Reference Manual page 1105

TFCS:0 TERR:0
1 - xg2:
RBYT:0 RPKT:0 TBYT:419413311 TPKT:620443
RFCS:0 RFRG:0 RJBR:0 RUND:0 ROVR:0
TFCS:0 TERR:0
The following table describes the fields in the example.
Field
Interface
Diagnostic Entry 1
Diagnostic Entry 2
Diagnostic Entry 3
show stack-standby
Use the show stack-standby command to show the Standby configured in the stack. The show
stack-standby command shows the configured or automatically selected standby unit number.
Syntax
show stack-standby
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC or User EXEC
User Guidelines
No specific guidelines.
Example
console>show stack-standby
standby unit: 3
Description
Port
80 character string used for diagnostics
80 character string used for diagnostics
80 character string used for diagnostics
1105