Dell PowerConnect M6348 Cli Reference Manual page 1134

enable
Use the enable command in User EXEC mode to enter the Privileged EXEC mode.
Syntax
enable
Default Configuration
The default privilege level is 15.
Command Mode
User EXEC mode
User Guidelines
If there is no authentication method defined for enable, then a level 1 user is not allowed to
execute this command.
Example
The following example shows how to enter privileged mode.
console>enable
console#
end
Use the end command to get the CLI user control back to the privileged execution mode or user
execution mode.
Syntax Description
end
Default Configuration
This command has no default configuration.
Command Mode
All command modes
User Guidelines
No specific guidelines.
1134