Complete Software Guide for Junos
show lldp
Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Table 392: show lldp Output Fields
Field Name
Field Description
LLDP
LLDP operating state. The state can be
NOTE: If a VLAN that has been configured for untagged packets on an interface
also has Layer 2 protocol tunneling (L2PT) enabled for LLDP, the LLDP operating
state for that interface is displayed as
Advertisement interval
Frequency, in seconds, at which LLDP advertisements are sent.
This value is set by the
Transmit delay
Delay between two successive LLDP advertisements. The delay is set to 2
seconds.
Multiplier used in combination with the
Hold timer
the length of time LLDP information is held before it is discarded.
This value is set by the
2990
®
OS for EX Series Ethernet Switches, Release 10.4
show lldp
<detail>
Command introduced in Junos OS Release 9.0 for EX Series switches.
Display information about Link Layer Discovery Protocol (LLDP) and Link Level Discovery
Protocol–Media Endpoint Discovery (LLDP-MED) configuration and capabilities on the
switch. LLDP and LLDP-MED are used to learn about and to distribute device information
on network links.
—Display LLDP information for all interfaces.
none
detail
—(Optional) Display detailed LLDP information for all interfaces.
view
Configuring LLDP (CLI Procedure) on page 2842
Configuring LLDP-MED (CLI Procedure) on page 2844
Understanding 802.1X and LLDP and LLDP-MED on EX Series Switches on page 2759
show lldp on page 2993
show lldp detail on page 2993
Table 392 on page 2990 lists the output fields for the
are listed in the approximate order in which they appear.
advertisement-interval
hold-multiplier
show lldp
enabled
or
disabled
.
.
disabled
configuration statement.
value to determine
advertisement-interval
configuration statement.
Copyright © 2010, Juniper Networks, Inc.
command. Output fields
Level of Output
All levels
All levels
All levels
All levels