Show Dot1X Firewall - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

show dot1x firewall

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
show dot1x firewall show dot1x firewall
show dot1x firewall
2984
®
OS for EX Series Ethernet Switches, Release 10.4
show dot1x firewall <interface interface-name>
Command introduced in Junos OS Release 9.5 for EX Series switches.
Displays information about the firewall filters for each user or nonresponsive host that
is authenticated on each 802.1X-enabled interface that is configured for multiple
supplicants. For example, if the firewall filter is configured with a term for counters, the
command shows the count for each user.
—(Optional) Display information for the specified interface.
interface interface-names
view
clear dot1x on page 2968
Example: Applying Firewall Filters to Multiple Supplicants on Interfaces Enabled for
802.1X or MAC RADIUS Authentication on page 2816
show dot1x firewall on page 2984
show dot1x firewall on page 2984
Output fields include any action modifier that is specified in firewall filters.
(Showing counter action)
user@switch> show dot1x firewall
Filter: dot1x-filter-ge-0/0/3
Counters
counter1_dot1x_ge-0/0/3_user1
counter1_dot1x_ge-0/0/3_user2
(Showing policer action)
user@switch> show dot1x firewall
Filter: dot1x_ge-0/0/0
Counters
p1-t1 494946
342
857
Copyright © 2010, Juniper Networks, Inc.