Show Captive-Portal Interface - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

show captive-portal interface

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Table 387: show captive-portal interface Output Fields
Field Name Field Description
Interface Interface on which captive portal has been configured.
Copyright © 2010, Juniper Networks, Inc.
show captive-portal interface
<interface-name>
detail
Command introduced in Junos OS Release 10.1 for EX Series switches.
Display the current operational state of all captive portal interfaces with the list of
connected users and the configured values of captive portal attributes on the interfaces.
—Display all captive portal interfaces.
none
interface-name —(Optional) Display the state for the specified captive portal interface
and lists the MAC address and user names of any clients authenticated on the
interface.
interface-name detail —(Optional) Displays the configured values of captive portal
attributes on the specified captive portal interface.
view
show captive-portal authentication-failed-users on page 2972
show captive-portal firewall on page 2973
captive-portal on page 2883
clear captive-portal on page 2966
Example: Setting Up Captive Portal Authentication on an EX Series Switch on page 2821
Configuring Captive Portal Authentication (CLI Procedure) on page 2848
show captive-portal interface on page 2976
show captive-portal interface detail on page 2976
Table 387 on page 2975 lists the output fields for the
Output fields are listed in the approximate order in which they appear.
Chapter 92: Operational Commands for Access Control
show captive-portal interface
Level of Output
All levels
command.
2975