Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 3096

Complete Software Guide for Junos
Table 392: show lldp Output Fields (continued)
Field Name Field Description
Basic TLVs supported on the switch:
LLDP basic TLVs
supported
802.3 TLVs supported on the switch:
Supported LLDP 802
TLVs
2992
®
OS for EX Series Ethernet Switches, Release 10.4
—TLV that advertises the MAC address associated with the
Chassis identifier
local system.
—TLV that advertises the port identification for the specified
Port identifier
port in the local system.
—TLV that advertises the user-configured port description.
Port description
—TLV that advertises the user-configured name of the local
System name
system.
System description —TLV that advertises the system description containing
information about the software and current image running on the system.
This information is taken from the software and is not configurable.
—TLV that advertises the primary functions performed by
System capabilities
the system—for example, bridge or router.
Management address —TLV that advertises the IP management address of
the local system.
MAC/PHY configuration status
physical interface, such as autonegotiation status and support and MAU type.
The information is based on the physical interface structure and is not
configurable.
—TLV that advertises MDI power support, PSE power pair, and
Power via MDI
power class information.
—TLV that advertises if the interface is aggregated and its
Link aggregation
aggregated interface ID.
—TLV that advertises the maximum transmission unit
Maximum frame size
(MTU) of the interface sending LLDP frames.
—TLV that advertises the VLAN tag configured on the interface.
Port VLAN tag
—TLV that advertises the VLAN name configured on the
Port VLAN name
interface.
—TLV that advertises information about the
Level of Output
detail
detail
Copyright © 2010, Juniper Networks, Inc.