Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 3084

Complete Software Guide for Junos
Table 388: show dot1x Output Fields (continued)
Field Name Field Description
The authentication method is restricted to MAC RADIUS only. 802.1X
MAC radius restrict
authentication is not enabled.
Reauthentication The reauthentication state:
disable
interval
is 3600 seconds. The range is 1 through 65,535 seconds.
The number of seconds the port waits for a response when relaying a request
Supplicant timeout
from the authentication server to the supplicant before resending the request.
The default value is 30 seconds. The range is 1 through 60 seconds.
Server timeout The number of seconds the port waits for a reply when relaying a response from
the supplicant to the authentication server before timing out. The default value
is 30 seconds. The range is 1 through 60 seconds.
The maximum number of retransmission times of an EAPOL request packet to
Maximum EAPOL
the supplicant before the authentication session times out. The default value
requests
is 2. The range is 1 through 10.
Number of clients The number of non-802.1X clients granted access to the LAN by means of static
MAC bypass. The following fields are displayed:
bypassed because of
authentication
Client
vlan
The VLAN to which a supplicant is connected when the supplicant is
Guest VLAN member
authenticated using a guest VLAN. If a guest VLAN is not configured on the
interface, this field displays <
The number of supplicants connected to a port.
Number of connected
supplicants
The user name and MAC address of the connected supplicant.
Supplicant
2980
®
OS for EX Series Ethernet Switches, Release 10.4
—Periodic reauthentication of the client is disabled.
—Sets the periodic reauthentication time interval. The default value
—MAC address of the client.
—The name of the VLAN to which the client is connected.
not configured
>.
Copyright © 2010, Juniper Networks, Inc.
Level of Output
detail
detail
detail
detail
detail
detail
detail
detail
detail