Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 3080

For ex series ethernet switches
Table of Contents

Advertisement

Complete Software Guide for Junos
Table 387: show captive-portal interface Output Fields (continued)
Field Name
Field Description
The state of the interface:
State
Authenticated
or has been permitted access through server fail fallback.
Authenticating
Connecting
Initialize
Held
—An action has been triggered through server fail fallback during a
RADIUS server timeout. A supplicant is denied access, permitted access
through a specified VLAN, or maintains the authenticated state granted to
it before the RADIUS server timeout occurred.
The MAC address of the connected client on the interface..
MAC address
Users connected to the captive portal interface.
User
Mode used to authenticate clients—multiple, single, or single-supplicant.
Supplicant mode
Number of times the user can attempt to submit authentication information.
Number of retries
Quiet period
Time, in seconds, after a user exceeds the maximum number of retries before
they can attempt to authenticate.
Time, in seconds, that a client can be idle before the session expires.
Configured CP
session timeout
Time, in seconds, that an interface will wait for a reply when relaying a response
Server timeout
from the client to the authentication server before timing out and invoking the
server-fail action.
Number of users connecting through the captive portal interface. Information
Number of
for each user includes:
connected
supplicants
Supplicant
Operational state
Dynamic CP session timeout
the RADIUS server for this user, if any.
CP Session expiration due in
show captive-portal
show captive-portal
interface
interface
show captive-portal
interface detail
2976
®
OS for EX Series Ethernet Switches, Release 10.4
—The client has been authenticated through the RADIUS server
—The client is authenticating through the RADIUS server.
—Switch is attempting to contact the RADIUS server.
—The interface link is down.
—User name and MAC address.
—See State (above).
—Timeout value dynamically downloaded from
—Time remaining in session.
user@switch> show captive-portal interface
Captive Portal Information:
Interface
State
ge-0/0/1.0
Connecting
ge-0/0/10.0
Connecting
user@switch> show captive-portal interface detail
ge-0/0/1.0
Supplicant mode: Multiple
Number of retries: 10
Quiet period: 60 seconds
MAC address
User
00:30:48:8c:66:bd
No User
Copyright © 2010, Juniper Networks, Inc.
Level of Output
All levels
brief
brief
detail
detail
detail
detail
detail
detail

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junos os 10.4

Table of Contents