8.10
Checking using the trace function
Overview
In a trace configuration, depending on the SINAMICS S drive being used, define the following:
• Signals to be recorded
• Recording duration
• Trigger conditions
Requirement
• For activated user management (UMAC):
The function rights required for trace configuration are activated for your user account.
Details on this topic are provided in Chapter "Security settings in Startdrive" of Industrial
Cybersecurity Configuration Manual
109810578).
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB
8.10 Checking using the trace function
(https://support.industry.siemens.com/cs/ww/en/view/
Commissioning (Startdrive)
311