Table of Contents
Advertisement
Commissioning (Startdrive)
8.2 Requirements for commissioning
8.2
Requirements for commissioning
Requirements
• TIA Portal version V19 or higher is installed on your operating unit.
• Startdrive version V19 or higher is installed on your operating unit.
You will find the download page at the following link
support.industry.siemens.com/cs/ww/en/ps/13438/dl).
• Firmware version V6.3 or higher is installed in the converter.
• You have all of the required licenses to use the TIA Portal without any restrictions.
220
(https://
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB
Advertisement
Table of Contents
