Fieldbus Communication; Communication Via Profinet Io; Configuring Profinet Io Operation; Connecting The Profinet Cable To The Converter - Siemens SINAMICS SIMOTICS S200 PROFINET Operating Instructions Manual

10.3

Fieldbus communication

10.3.1

Communication via PROFINET IO

Overview
You can integrate the converter into a PROFINET network.
Description of function
Figure 10-1
The converter supports the following functions:
• RT (Real-Time)
• IRT (Isochronous Real-Time)
• MRP (Media Redundancy Protocol): Media redundancy, with transition bump.
• MRPD (Media Redundancy Planned Duplication): Media redundancy, bumpless.
• Diagnostic alarms in accordance with the error classes specified in the PROFIdrive profile.
• Device replacement without removable data storage medium: The replacement converter is
assigned the device name from the IO controller, not from its SD card or from the
programming device.
10.3.2

Configuring PROFINET IO operation

10.3.2.1

Connecting the PROFINET cable to the converter

Requirement
You have set up a PROFINET network for connecting the converter.
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB
The converter in PROFINET IO operation (examples)
Functions
10.3 Fieldbus communication
325