Interconnecting The Technology Object And A Converter - Siemens SINAMICS SIMOTICS S200 PROFINET Operating Instructions Manual

8.5.2.4

Interconnecting the technology object and a converter

Overview
The inserted technology object "TO_PositioningAxis" must be interconnected with the converter.
Requirement
• A SINAMICS drive is created and specified.
• A control system (e.g. SIMATIC S7-1500) is created and networked with the drive.
• For activated user management (UMAC):
The function rights for editing drive and control system data are activated for your user
account.
Details on this topic are provided in Chapter "Security settings in Startdrive" of Industrial
Cybersecurity Configuration Manual
109810578).
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB
8.5 Combining and configuring devices in the project
(https://support.industry.siemens.com/cs/ww/en/view/
Commissioning (Startdrive)
251