Description
3.1 System overview
* The interfaces X131 and X108 are available on S200 PN only. For more information about the motor holding brake connection
on S200 Basic PN, see Section "Connecting the motor holding brake (Page 139)".
①
Fuse or motor starter protector
②
Line filter (optional)
③
External braking resistor (optional)
④
SIMOTICS S-1FL2 motor
⑤
Motor power cable (with brake conductors)
⑥
Encoder cable
⑦
Shield plate
When using the components, make sure that they are connected to the ground correctly.
1)
Figure 3-3
System components and accessories for converters with 3 AC line connection
42
1)
1)
⑧
Shield clamp
⑨
24 V DC power supply
⑩
STO plug
⑪
SD card (optional)
⑫
Commissioning device
⑬
Controller (for example, SIMATIC S7-1500)
⑭
PROFINET to the next participant
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB