Table of Contents
Advertisement
Commissioning (Startdrive)
8.3 Basics
8.3.2
Protected communication
Description
If the Startdrive project and the converter are unprotected, access is possible via both interfaces.
This enables unrestricted access from the project or a higher-level controller to the converter
data.
Non-authorized users can manipulate the converter data. To avoid the risk of data
manipulation, Siemens recommends that you protect access to the project and the converter.
Detailed information about security settings is provided in Industrial Cybersecurity
Configuration Manual (https://support.industry.siemens.com/cs/ww/en/view/109810578).
8.3.3
User administration and security
Overview
Startdrive provides the possibility to use user management and access control (UMAC) for
projects. This allows you to create and manage user accounts and roles in your project. The roles
bundle different access rights for the project. Different users can be granted different access
rights to functions. Once the project protection has been activated, the project can only be
opened and edited by authorized users.
Requirement
• A project has been created or an existing project is open.
222
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB
Advertisement
Table of Contents
